Consists of a copper pot filled with a copper (II) sulfate solution, in which is immersed an unglazed earthenware container filled with sulfuric acid and a zinc electrode...

     This single instrument is a combination of INDUCTANCE, CAPACITANCE and RESISTANCE.This specially designed Decade Lab is a Combination of Decade Inductance, Decade Capacitance & Decade Resistance. This 3 in 1Combo Lab is made very precisely to use as a higher end accurate Device for testing and calibrating of all kind ..

Four decade resistors of 1K Ω, 100 Ω, 10 Ω and 1Ω is fitted on a box. Accuracy is ±1%..

A  6V DC motor fitted on a clamp driven by a big size pulley to generate electrical signals. A bulb will light up on drive the motor...

This generator can demonstrate the principles of an electromagnet motor. This makes it great for experiments that need low current < 1 AMP. Generators are used to produce a voltage or potential difference in wire. An outside source of energy is needed to turn the turbine in the generator. In this case, the mechanical energy to turn the ..

This model is mounted on a base plate 200 x 125 mm approx. which also carries a hand-drive pulley 125 mm diameter coupled to the smaller dynamo pulley by a rubber belt to give a step-up ratio. Electrical output is via a pair of 4mm sockets and a light emitting diode is provided as simple output indicator. The model may also be used as a m..

The construction of the model is completely open with all components easily identifiable and functioning clearly  observable...

De Sauty Bridge is a very simple type of AC Bridge used to measure capacitance. Here we measure in unknown capacitance in terms of known capacitance and known resistance. Hence, we design a De Sauty Bridge by using two known resistances (R1 and R4), one known capacitance (C2) and one unknown capacitance (C3). The device gives the expression o..

A four digit display meter  fitted in a box. its current range is 5A...

DC     Ammeter                     DC Voltmeter   199.9µA 199.9mV 1.999mA 1.999V 19.99mA ..

Two identical motors mounted on the plastic moulded base with their shafts joined by means of a flexible coupling and both are connected with 4mm lour coded sockets mounted on the base...

The complete solar cell and the motor unit mounted in a clear acrylic case for easy viewing by students. Provides quite effective demonstration in day light or in light of a normal 100W bulb...

Includes a set of 6 electrodes - two point source electrodes, two line source electrodes and two circular rings of 35 and 70mm diameter respectively...

1. Characteristics of a complete circuits. 2. Materials used as a best conductor of electricity. 3. Working of a switch. 4. How do I control the brightness of the bulb? 5. Changing of circuits. 6. To draw a block diagram of a circuit. 7..

The two stainless steel electrodes are heavily insulated and the two electrical connection leads are equipped with extra-large clips. Also included are two rubber gaskets to provide positive seals for the filled test tubes while they are being inverted and placed into a beaker...