Any one of the pendulums can be adjusted without disturbing the others. 28cm long clamp consists of a support arm attached to a rod clamp. Thumb screws keep suspended cords secure.NEWTONIAN DEMONSTRATOR OR COLLISION BALLSn ideal simple pendulum consists of a heavy point mass (called bob) tied to one end of a perfectly inextensible, flexible and wei..

A wooden board of 50x60 cm. with wall brackets, two frictionless clamp pulleys, and three set of slotted weights of iron nickelled each set containing four weight and one hanger of 50gms  ..

Two photo gates incorporated with photodiode and photo transistor are specially used with digital counter with g by free fall apparatus. It is used to measure the time taken by a cart.PHCAA350/1 Photo gates..

A gyroscope is a device that consists of a spinning mass, usually a heavy disk called a rotor, that is mounted on a base. The rotor has a spin axis positioned through the center of it. The rotor is mounted and moves within gimbals that allow it to move freely in any direction. This is mounted within a frame. Because of its ability to move in any di..

This all-metal launcher can be clamped to any lab table, at any angle from –15º to 90º, in a matter of seconds. The range of the launcher arm is infinitely adjustable with its unique but simple releasing device. Every student can have his own unique set of data by minor adjustments on the tension spring. The launcher was designed so that no matter ..

This Pulley Demonstration Set is designed to illustrate the working principles of simple machines. From the wheels on a bicycle to the gears in a car, the Pulley Demonstration System helps explain how things work. Understand the concepts of mechanical advantageStudy the efficiency of fixed and moveable pulleysPerform experiments on fixed and m..

Pulley mounted on a single piece bracket with one bigger clamping screw for anchoring the bracket to the edge of bench or force-board etc., and on slot with transverse clamping screw for mounting the assembly to a metal support rod up to 13mm in diameter along the length of rod.PHCAA040/1Small frame with pulley of 50mm diameter5PHCAA040/2Large fram..

This aluminium, 50mm diameter bench-mounting pulley can be clamped to benches or boards of up to 28mm thickness...

luminum pulleys, 38mm diameter, machine turned,having wide grooves for whip cord. Mounted in cast metal frame and accurately centered. Pulley configurations available arePHCAA000/1Single with 1 HookPHCAA000/2Single with 2HooksPHCAA000/3Double Sheave `PHCAA000/4Triple(Parallel)Sheave(Parallel)PHCAA000/5Quadruple Sheave (Parallel)PULLEYS, METAL, 50mm..

This is a cast iron spring driven projectile apparatus.  It demonstrates that a horizontally projected ball and vertically dropped ball land at the same time. The spring device can propel ball to 48" from its starting point. A detachable rod for clamping to a table or stand...

Demonstrate how photovoltaic panels can produce electrical energy. Car can be operated two ways: by solar energy charging a AA battery or direct solar energy to move a motor that in turn moves the wheels to drive the car forward. An auxiliary mode is also available to connect the solar cell to other electrical devices. The car can be used outside i..

Operates at a frequency of 50 to 60Hz, equivalent to that of the mains power supply, and is supplied with one roll of ticker tape and  Carbon Discs. It will give good results if operated from a 6-12V AC power supply. Higher voltage causes the tape to be subject to a greater drag. This device uses an electromagnet which activates a striker..

Consisting of a wooden double wheel with flat-bottomed grooves, 150 and 50 mm diameter respectively. The wheel is pivoted on a spindle 10 mm diameter which projects for a distance of 100 mm so that the apparatus may be clamped to a normal retort stand. The apparatus is supplied complete with two hooks and 6 meters of cord but without masses and sta..